scraping noise
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
scraping noise
im gettig a scraping noise on my cuts now im sure it has to do with angle/weight
its a high pitched whine and not loud but i dont want it on my cuts
any ideas?
im using tungsten
its a high pitched whine and not loud but i dont want it on my cuts
any ideas?
im using tungsten
Instagram @styluspressurerecords
Re: scraping noise
It might be that the cutting needle could be getting dull?
Have you tried exchanging needles for a fresh one?
Have you tried exchanging needles for a fresh one?
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: scraping noise
Instagram @styluspressurerecords
Re: scraping noise
It kinda sounds like its picking up the vibration from the rubber puck runnin the platter?
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: scraping noise
could be
but its a brand new wheel and its lubed well on the bearing
but its a brand new wheel and its lubed well on the bearing
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: scraping noise
im chalking it up to weight i switched drivers in my head and these ones i have now are slightly heavier and required a different mounting system
im going to make a counter weight
im going to make a counter weight
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: scraping noise
the counter weight did not help
im stumped ive been cutting steady for nine months and then this
weird
help!!!!
im stumped ive been cutting steady for nine months and then this
weird
help!!!!
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: scraping noise
got it sorted!
weight and rake was the problem
cheers
fred
@madstyluspressure on insta!!!
heres a vid of the problem
https://vid.me/5xp8
weight and rake was the problem
cheers
fred
@madstyluspressure on insta!!!
heres a vid of the problem
https://vid.me/5xp8
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: scraping noise
im still getting a noise after rebuilding my head and slacking the angle as much as possible
if i cant get this sorted im probably going to sell my rig
if i cant get this sorted im probably going to sell my rig
Instagram @styluspressurerecords
Re: scraping noise
Oh dude you know it's something easy don't give up!
<\\\\\\\\\\\\\\\\\\\\\[[[[[[[\/]]]]]]]\\\\\\\\\\\\\\\\\>
Recordette Sr.......Presto K-8
Recordette Sr.......Presto K-8
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: scraping noise
i took the entire rig apart and im going to take my time and source this out
im too invested in time
cheers
im too invested in time
cheers
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: scraping noise
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: scraping noise
https://www.instagram.com/p/BVQnd8VDMaH/?taken-by=madstyluspressure&hl=en
https://www.instagram.com/p/BVQoHtwDKDf/?taken-by=madstyluspressure&hl=en
im cutting slightly wet as well leaving a slight film of wax on the disc
music sounds good and the grooves track well
https://www.instagram.com/p/BVQoHtwDKDf/?taken-by=madstyluspressure&hl=en
im cutting slightly wet as well leaving a slight film of wax on the disc
music sounds good and the grooves track well
Instagram @styluspressurerecords
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm