RECORDLATHEPARTS.com - Sapphire embossing styli, feedscrews
Hey everyone, I just launched http://www.RecordLatheParts.com, which is a site to sell, uhhh... record lathe parts. I will be eventually putting up lathes, cutter heads, additional supplies, etc as I get them going, but for now we've got:
Sapphire Embossing Styli (long and short shank)
Presto 6n/8n Feedscrews
CD-Record adapters (allows you to center a CD on a turntable spindle)
Presto 6d/"Presto Recorder" Feedscrews
If you've bought some of these things from me in the past, please leave a review in this thread. Thanks! Mike.
Sapphire Embossing Styli (long and short shank)
Presto 6n/8n Feedscrews
CD-Record adapters (allows you to center a CD on a turntable spindle)
Presto 6d/"Presto Recorder" Feedscrews
If you've bought some of these things from me in the past, please leave a review in this thread. Thanks! Mike.
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: RECORDLATHEPARTS.com - Sapphire embossing styli, feedscr
Tried to place an order but it said there was no payment type for my location which is in California?piaptk wrote: If you've bought some of these things from me in the past, please leave a review in this thread. Thanks! Mike.
Re: RECORDLATHEPARTS.com - Sapphire embossing styli, feedscr
Weird.. Ok. This is my first goaround with Shopify. Let me look into it...
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
Re: RECORDLATHEPARTS.com - Sapphire embossing styli, feedscr
Ok. Sorry about that. I think it will work. Try again.
If you are outside of the US, Please let me know if it doesn't work. I'm not seeing any international payment options in there. (this is why I prefer 1940s technology).
If you are outside of the US, Please let me know if it doesn't work. I'm not seeing any international payment options in there. (this is why I prefer 1940s technology).
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
- Aussie0zborn
- Posts: 1825
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Re: RECORDLATHEPARTS.com - Sapphire embossing styli, feedscr
It took me straight to Paypal on checking out so seems to work
OK.
OK.
Re: RECORDLATHEPARTS.com - Sapphire embossing styli, feedscr
Thanks for checking, Mike!
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
- soeffingodly
- Posts: 273
- Joined: Fri Jan 19, 2018 8:48 am
- Location: Florida, USA
Re: RECORDLATHEPARTS.com - Sapphire embossing styli, feedscr
Thanks for the sapphire needles piaptk!
"I wasn't lying. Things I said later seemed untrue."
- socialroots
- Posts: 161
- Joined: Tue Nov 11, 2014 2:33 pm
- Location: Dulan village,Taitung,Taiwan
Re: RECORDLATHEPARTS.com - Sapphire embossing styli, feedscr
Got 3 sapphires from Mike few mnths ago to give embossing another try. Still on my 1st styli after 40 +cuts. I like the fact that i dont really have to change the cutting weight too much as i change from cutting with myshank diamonds to embossing ,just a very slight leanback angle,much less then embossing with the tungsten cones.Worked great on pc,and petg and myshank blanks.
The sound? I think its deffinitely an upgrade from the tungsten but slightly less volume and overall fidelity than cutting with diamonds. Great option to have when i want to do a less critical,lofi sounding record with that vintage vibe,and i can prolong the cutting hrs of my diamond styli by using it more for some music that demands a higher quality sound,certain kinds of music just doesnt translate aswell with embossing,but alot does!
Maximum respect,
Patrick
The sound? I think its deffinitely an upgrade from the tungsten but slightly less volume and overall fidelity than cutting with diamonds. Great option to have when i want to do a less critical,lofi sounding record with that vintage vibe,and i can prolong the cutting hrs of my diamond styli by using it more for some music that demands a higher quality sound,certain kinds of music just doesnt translate aswell with embossing,but alot does!
Maximum respect,
Patrick