Wanted - Presto 8dg lathe drive pulley x 2
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Wanted - Presto 8dg lathe drive pulley x 2
Look for the two brass, bronze drive pulleys, original or repro
Maybe someone could get a local engineering company the copy theirs, happy to pay.
Maybe someone could get a local engineering company the copy theirs, happy to pay.
Happy to learn something new.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
- EpicenterBryan
- Posts: 738
- Joined: Sun Aug 10, 2014 9:01 pm
- Location: Eugene, OR USA
Re: Wanted - Presto 8dg lathe drive pulley x 2
I have a spare original brass one for the overhead side of an 8D. You will need to check if it is the same as the 8DG.
The Aluminum one shown mounted on my lathe was custom made for the previous owner to have different pitch combinations. It works works fine for me.
Shoot me a PM with your absolute best offer and I'll think about it... I'm always a buyer and rarely a seller.
Bryan
The Aluminum one shown mounted on my lathe was custom made for the previous owner to have different pitch combinations. It works works fine for me.
Shoot me a PM with your absolute best offer and I'll think about it... I'm always a buyer and rarely a seller.
Bryan
You do not have the required permissions to view the files attached to this post.
- audiocarver
- Posts: 97
- Joined: Thu Mar 23, 2006 11:35 am
- Location: Wausau, WI USA
Re: Wanted - Presto 8dg lathe drive pulley x 2
Hi Bryan,
What does the bronze "C" do around the turn table shaft pulley? Does it clamp at the bottom of the TT bearing housing or something?
Regards,
Andy
What does the bronze "C" do around the turn table shaft pulley? Does it clamp at the bottom of the TT bearing housing or something?
Regards,
Andy
Re: Wanted - Presto 8dg lathe drive pulley x 2
I am interested if you still have it
Happy to learn something new.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Re: Wanted - Presto 8dg lathe drive pulley x 2
It seems I will need the bronze c bearing adaptor as well
Happy to learn something new.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Re: Wanted - Presto 8dg lathe drive pulley x 2
Pics
You do not have the required permissions to view the files attached to this post.
Happy to learn something new.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Re: Wanted - Presto 8dg lathe drive pulley x 2
More
You do not have the required permissions to view the files attached to this post.
Happy to learn something new.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
- EpicenterBryan
- Posts: 738
- Joined: Sun Aug 10, 2014 9:01 pm
- Location: Eugene, OR USA
Re: Wanted - Presto 8dg lathe drive pulley x 2
I'm confused. Why is it that you want to change over to pulleys?
Isn't the 8dg direct drive? Mine is a rim drive 8D so I really don't know how the pulleys come into play with the direct shaft.
In your photos I don't see the direct drive shaft.
Bryan
Isn't the 8dg direct drive? Mine is a rim drive 8D so I really don't know how the pulleys come into play with the direct shaft.
In your photos I don't see the direct drive shaft.
Bryan
Re: Wanted - Presto 8dg lathe drive pulley x 2
The 8dg was originally a pulley like yours. What I have a cross between an 8DG and a 8DGV - a prototype. I was thinking of changing it back to the standard 8DG
Happy to learn something new.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Wanted: Stylus for Presto, Mono heads Grampian, Fairchild, Presto, Fairchild 740 lathes, Presto 8n, 8d 8dg lathes or parts or Presto or wot ever recording Amps, PM me what you have for sale.
Re: Wanted - Presto 8dg lathe drive pulley x 2
I have an extra screw side pulley, but not a platter side pulley...
I Buy/Sell/Restore Vintage Machines/Parts and Provide Phone/In Person Tech Support
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com
www.MichaelDixonVinylArt.com
www.LatheCutCamp.com
www.RecordLatheParts.com
www.MobileVinylRecorders.com
www.LatheCuts.com