cdr embossing
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
cdr embossing
i made a little sampler recording of some cdr lathe cuts
you can hear the hf loss towards the center as the needle gets close to the center of the cdr but you get the idea
cheers
fred
https://www.dropbox.com/s/7up80dvlf77d8e0/stylus%20pressure%20cdr%20lathe%20cut%20sampler.wav?dl=0
you can hear the hf loss towards the center as the needle gets close to the center of the cdr but you get the idea
cheers
fred
https://www.dropbox.com/s/7up80dvlf77d8e0/stylus%20pressure%20cdr%20lathe%20cut%20sampler.wav?dl=0
Instagram @styluspressurerecords
Re: cdr embossing
these sound great! are they Embossed? do you mind sharing the setup?
they sound better than my embossed cuts, but I'm using digital iRIAA, my bearings broken and I've got no suspension
they sound better than my embossed cuts, but I'm using digital iRIAA, my bearings broken and I've got no suspension
- fredbissnette
- Posts: 383
- Joined: Tue Oct 11, 2016 5:38 pm
Re: cdr embossing
https://www.youtube.com/watch?v=l2PU3cPf2d0&t=113s
im on instagram as well @styluspressurerecords
i do have a suspension now as well
its just power into pressure and some crafty eq
cheers
fred
im on instagram as well @styluspressurerecords
i do have a suspension now as well
its just power into pressure and some crafty eq
cheers
fred
Instagram @styluspressurerecords
Re: cdr embossing
Hi @fredbissnette,
Is your video still available, I'm interested in your setup too.
Is your video still available, I'm interested in your setup too.
Re: cdr embossing
I second that. Even though i have a non functional HMV 2300H, You fredbissnette have inspired me to do a build of my own after watching your videos. I was actually using your videos as blueprint of sorts for my own build but now you have removed them Hoping you could re-upload them at some point or if you don't mind could you send me the files for my own reference.