caruso infos. new link
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
caruso infos. new link
hello
unfortunately the vinylike.de site took a french leave.
so all info's was gone too.
but vinylike.com is still around.
here again the most important stuff. will put more stuff whenever i find a minute. check from time to time.
but most you need is there. also a video about calibration and
some links infos to pressed records where the master is done with a caruso head, system. there are a few out now who use caruso only to cut masters sucessfully..
check
http://www.vinylike.com
and yes
a very nice video of a nice thorens lathe rebuild by a swiss guy. custom made controller.all midi controlled. head drop.lift.
caruso head. caruso preamps. current meters. qsc gx3 amp.
https://www.rts.ch/play/tv/nouvo/video/graveur-vintage-pour-vinyles-modernes?id=9042703&station=a9e7621504c6959e35c3ecbe7f6bed0446cdf8da
unfortunately the vinylike.de site took a french leave.
so all info's was gone too.
but vinylike.com is still around.
here again the most important stuff. will put more stuff whenever i find a minute. check from time to time.
but most you need is there. also a video about calibration and
some links infos to pressed records where the master is done with a caruso head, system. there are a few out now who use caruso only to cut masters sucessfully..
check
http://www.vinylike.com
and yes
a very nice video of a nice thorens lathe rebuild by a swiss guy. custom made controller.all midi controlled. head drop.lift.
caruso head. caruso preamps. current meters. qsc gx3 amp.
https://www.rts.ch/play/tv/nouvo/video/graveur-vintage-pour-vinyles-modernes?id=9042703&station=a9e7621504c6959e35c3ecbe7f6bed0446cdf8da
Re: caruso infos. new link
Just remember this post about the caruso
- subkontrabob
- Posts: 284
- Joined: Fri Oct 30, 2009 5:40 am
- Location: Helsinki, Finland
Re: caruso infos. new link
For anyone interested in the old caruso page, it can still be found here:
https://web.archive.org/web/20170806012247/http://vinylike.de/index.php/carusopreamp/
Documentation of the v1 board of the Preamp can still be found on Florian's own page:
http://www.floka.com/caruso/schematics_caruso_pre10.pdf
http://www.floka.com/caruso/partslist_caruso_pre10.pdf
http://www.floka.com/caruso/caruso_pre_built1s.jpg
http://www.floka.com/caruso/caruso_pre_connections.jpg
http://www.floka.com/caruso/caruso_pre_block.pdf
https://web.archive.org/web/20170806012247/http://vinylike.de/index.php/carusopreamp/
Documentation of the v1 board of the Preamp can still be found on Florian's own page:
http://www.floka.com/caruso/schematics_caruso_pre10.pdf
http://www.floka.com/caruso/partslist_caruso_pre10.pdf
http://www.floka.com/caruso/caruso_pre_built1s.jpg
http://www.floka.com/caruso/caruso_pre_connections.jpg
http://www.floka.com/caruso/caruso_pre_block.pdf
Re: caruso infos. new link
anyone able to pick up a caruso? despite emailing for a few years I've had no luck or direction towards an actual purchase
making lathe cuts on a Presto 6N, HIFI stereo cuts on vinylrecorder
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com
at Audio Geography Studios, Providence, RI USA
http://www.audiogeography.com