Engraving pen ? what tool are you using?

Introduce yourself! Recommended for people who are just starting out, as opposed to experienced lathe cutters who are new members.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
urieldeveaud
Posts: 13
Joined: Tue Mar 17, 2020 6:13 pm

Engraving pen ? what tool are you using?

Post: # 60220Unread post urieldeveaud
Fri Feb 11, 2022 12:47 pm

Hi guys,
i am trying to figure out what tool to use to write on the surface of the disc. I am talking about writing serial number, artists names and so on, in the lead-out section of the record.
i did some engraving with a simple needle but i loose control over the text and the result is not good at all !

i found this pens but i am not sure this is right (see attachment)
Please, can you show the tool you are using to keep this practice smooth and easy ! :wink:
You do not have the required permissions to view the files attached to this post.


User avatar
RedSpadeRobyn
Posts: 26
Joined: Sat Dec 16, 2017 2:55 pm

Re: Engraving pen ? what tool are you using?

Post: # 60464Unread post RedSpadeRobyn
Wed Mar 23, 2022 11:42 pm

I have 2 of the ones in the photo. The 1st on the left and the last on the right. I just use them for scribing into petg and poly carb. I don’t cut lacquers, for what my experience is worth.

Post Reply