heating coil

This is where record cutters raise questions about cutting, and trade wisdom and experiment results. We love Scully, Neumann, Presto, & Rek-O-Kut lathes and Wilcox-Gay Recordios (among others). We are excited by the various modern pro and semi-pro systems, too, in production and development. We use strange, extinct disc-based dictation machines. And other stuff, too.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
eatree
Posts: 10
Joined: Thu Feb 21, 2013 4:48 am

heating coil

Post: # 28853Unread post eatree
Wed Feb 05, 2014 7:11 pm

The heating wire on my neumann 320 stylus was broken. And I want to made new heating coil. What material from domestic environment I can use for this? I think may be used heating wire from soldering-iron, but it's has a high resistance (around 110 ohms) at similar length. It's not good, cause I must to reconstruct my AC adapter. What may be suitable for mounting the coil except dental cement?
Top

Click Here!

Aussie0zborn
Posts: 1868
Joined: Sat Mar 11, 2006 8:23 am
Location: Australia
Contact:
Contact Aussie0zborn

Re: heating coil

Post: # 28864Unread post Aussie0zborn
Fri Feb 07, 2014 9:17 am

There are some discussions on heating wire here:

https://www.lathetrolls.com/viewtopic.php?f=1&t=7&hilit=Heater+wire

https://www.lathetrolls.com/viewtopic.php?f=1&t=4100&p=28222&hilit=Heater+wire#p28222

Try the SEARCH function to find more.
Top
Post Reply

Click Here!