http://www.ebay.co.uk/itm/ATOM-7-VINYL-RECORD-CUTTER-LATHE-Graveur-Vinyles-VANROCK-not-Presto-Neumann-/262684950125?hash=item3d293e3e6d:g:T5gAAOSwVllXHRMY
I'm looking for these but this is a bit over priced for untested
Ebay: Atom A-101 7" lathe
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Re: Atom A-101 7" lathe
Won this, paid a bit more than I wanted too but that's eBay for you
Re: Atom A-101 7" lathe
Does anyone out there have a schematic for the ATOM A101?
I am going to try to see if a local electronics place can find out what is the issue with the one I purchased.
Then if I decide to sell rather than invest more - I can say what exactly is wrong with it. Right now, the platter does not spin. Opened it up and nothing obvious - belts are all new.
I am going to try to see if a local electronics place can find out what is the issue with the one I purchased.
Then if I decide to sell rather than invest more - I can say what exactly is wrong with it. Right now, the platter does not spin. Opened it up and nothing obvious - belts are all new.
Re: Atom A-101 7" lathe
Huynh Viet Phuong
-
discosdecorte
- Posts: 142
- Joined: Tue May 21, 2019 1:01 pm
- Contact:
Re: Atom A-101 7" lathe
Hi athoa2487!athoa2487 wrote:Hi Jacu1
Please p.m me, I will help you repair this Atom A101.
email : athoa2487@gmail.com
I think I need some help too...
🄳🄸🅂🄲🄾🅂 🄳🄴 🄲🄾🅁🅃🄴
www.instagram.com/decortediscos
www.instagram.com/decortediscos
ATOM A101 FOR SALE
Hey All,
I am planning to sell my ATOM A101 soon. I am going to list it for 3000 US - it also comes with two diamond MyShank cutting stylus, one with heating wires, one without and both with only 50 cuts on each).
I had posted that I had a problem with it - but the problem was with me and not giving it the proper voltage.
It works great now and the machine is CLEAN! Great Condition. I have successfully cut 45s on it and i will be glad to send examples of the cuts.
I have read about people getting ripped off so I will have explore some kind of eskrow thing before I mail it anywhere.
I will cover shipping costs in the US - but if outside - buyer will have to pay for that.
She is beautiful and even comes with original record labels and manual.
I could list on eBay but I don't really trust that enough because of problems folks have had - and I wanted to offer it to the Troll community first.
Anyone interested can message me here. - Jer (jacu1)
I am planning to sell my ATOM A101 soon. I am going to list it for 3000 US - it also comes with two diamond MyShank cutting stylus, one with heating wires, one without and both with only 50 cuts on each).
I had posted that I had a problem with it - but the problem was with me and not giving it the proper voltage.
It works great now and the machine is CLEAN! Great Condition. I have successfully cut 45s on it and i will be glad to send examples of the cuts.
I have read about people getting ripped off so I will have explore some kind of eskrow thing before I mail it anywhere.
I will cover shipping costs in the US - but if outside - buyer will have to pay for that.
She is beautiful and even comes with original record labels and manual.
I could list on eBay but I don't really trust that enough because of problems folks have had - and I wanted to offer it to the Troll community first.
Anyone interested can message me here. - Jer (jacu1)
Re: Atom A-101 7" lathe
Are you still in bussiness? Or did you sell your machine allready? Must be! Just asking.