W.T.B Presto 6n parts

[dhturbo1]

Hi,Trolls im just putting together a presto 6n & need some bits & bobs,has anyone got the following parts:

complete,cutter release lever,cutter hinge & cutter bracket part no:in the presto manual 6n47, 6n54 ,6n55 (all the ally bits together)

also wanted is the complete dashpot (all bits) no:in the presto manual 6n52, 6n61, 6n62, 6n63, 6n64

Timescale assembly & indictor

Will also be willing to buy a complete overhead arm condition not important as long as its priced fair/good.

Please let me no what you have,Thanks in advance.

[dhturbo1]

Im still looking, for these parts or if anyone has a complete 6n arm rusty or not please get in touch.Thanks

[Kris D]

The dashpot assembly is not required if you are cutting at 33. Finding the other parts will be difficult. 47 could be cut from 1/8th inch aluminum and bent to shape. 54&55 are cast and machined. Would probably be cheaper to find another complete arm then to fab parts. If you could find someone who has modified a 6n to hold a vinylium head or another bigger head they might sell you the original parts.

Good luck!!
Kris

[piaptk]

Sergey is selling an arm... not sure if you want to pay his price though.

[dhturbo1]

Sergey is selling an arm... not sure if you want to pay his price though.

Hi,what price should it be around? Thanks

[piaptk]

Sergey is selling an arm... not sure if you want to pay his price though.

Hi,what price should it be around? Thanks

Whenever they come up on ebay they sell for around $150-300 ish. But then again, he was selling the arm and stylus for $400 (I think dollars, might be euro), and he said the stylus is sold, so maybe you could get it from him for $300. Can't hurt to ask.

https://lathetrolls.com/viewtopic.php?t=1967&mforum=lathetrolls