WTD: Presto 6N CUTTER-CAM LEVER

Selling equipment? know of a good lead on obtaining equipment? looking to buy? You can post info here.

Note: We have no system in place, nor the human resources, to enforce fees, for what amounts to placing an ad with the best possible audience for your items. Nonetheless, there is hope, need, and expectation: Please show good will, and help the site survive, by giving a contribution (using the golden button up top) when your item sells, or if the site helps you find the service you need.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
petermontg
Posts: 611
Joined: Sat Jun 26, 2010 7:51 am
Location: Ireland.

WTD: Presto 6N CUTTER-CAM LEVER

Post: # 12677Unread post petermontg
Wed Feb 09, 2011 8:41 am

IN NEED OF A NEW ONE.

AS YOU SEE BELOW LEFT ARM IS CRACKED.

ANYBODY WITH ANY IDEAS, LET ME KNOW.




REGARDS
PETER

Image
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com

Stereo cutter head wanted. Send email or smoke signals.
Top

Click Here!

User avatar
Jordiphon
Posts: 16
Joined: Thu Jun 07, 2007 8:13 am
Location: Madrid. Spain

Post: # 12680Unread post Jordiphon
Wed Feb 09, 2011 10:15 am

Hi.
If you don´t find that part, maybe the solution would be to weld the aluminum using this:

http://cgi.ebay.co.uk/Aluminium-Welding-Low-Temp-Durafix-Easyweld-5-x-Rods-/370429887006?pt=LH_DefaultDomain_3&hash=item563f57821e#ht_3491wt_1141
Top
User avatar
petermontg
Posts: 611
Joined: Sat Jun 26, 2010 7:51 am
Location: Ireland.

Post: # 12692Unread post petermontg
Wed Feb 09, 2011 8:37 pm

It's not a major issue at the moment. But I'd like to replace it eventually. I'll try weilding it at some stage so.

Thank you for pointing those rods out.
Peter Montgomery
+353(0)894926271
peter(at)petermontgomerymastering.com

Stereo cutter head wanted. Send email or smoke signals.
Top
Post Reply

Click Here!