Blank PVC in black and coloured please read here---->

Post: # 12216Unread post **fraggle** Tue Jan 18, 2011 2:43 am

Hey guys Mossy is going to press some black and let's say blue blanks for us. They come without carbon so they should sound allright!
Mossy received a new formular which is ink based.
He asked me to organize this so please send me a PM with your order & and address.
I will collect the money once we have enough orders to make it worth I will transfer the money to Mossy and he will send the Discs out!
Guys this is the chance to get some black and coloured blanks for not too much money!
Important send the PM too ME so I can work everything out!
This will be available Only in Boxes of 50 Discs!

Box of 12" black or blue = 90 USD + Postage
Box of 7" black or blue = 50 USD + Postage

Guys please order as much as you can to make it worth.
Cheers

Post: # 12218Unread post **fraggle** Tue Jan 18, 2011 3:20 am

I just did a soundcheck again.A while ago I did a cut on a blue Vinyl
(B side) with a vinylium diamond and it sounds really good at least like polycarbonate.
So this has to be good:)

Post: # 12222Unread post **piaptk** Tue Jan 18, 2011 10:12 am

Where are you Fraggle?

I'll probably take a box of each...

Post: # 12225Unread post **petermontg** Tue Jan 18, 2011 10:52 am

ill pass . cost far to much now and then custom clearance on top.

Post: # 12238Unread post **fraggle** Tue Jan 18, 2011 6:11 pm

I'm in Australia not sure where abouts mossy wants to press them.
Too much? a 7" inch for 1 usd and a 12" for 1.80 usd?
Dude thats cheaper than souris blanks and also cheaper than any polycarbonate.....

Post: # 12241Unread post **cymbalism** Tue Jan 18, 2011 7:56 pm

I'd try it but I'm afraid of the damage that may occur to the diamond.

Any word on lasting time if cut with the diamond? Or if sapphire would do the jobby job?

Post: # 12254Unread post **mossboss** Wed Jan 19, 2011 2:51 am

Hey Guys
For EU orders they will be made in the EU so no customs duty etc just postage cost
Aus there but that is only Boris so far and may be Perthection
USA will have to deal with it but it cannot be much as they are blanks
Cheers

Post: # 12255Unread post **petermontg** Wed Jan 19, 2011 3:21 am

Ok I'll try a box if each first if everything works out I'll put in bigger order.

What's happening postage will it go you first and then onto me?

Post: # 12268Unread post d Wed Jan 19, 2011 4:17 pm

These blanks works with diamond only?

Post: # 12276Unread post **fraggle** Thu Jan 20, 2011 3:17 am

yes i think so mate
diamonds @ vinylike, the shank or vinylium.
cheers

Post: # 12277Unread post **fraggle** Thu Jan 20, 2011 3:19 am

@ petermontg
send me a pm you will then get details
i'm collecting the cash and send it to mossy then.
mossy is going to send you the blanks when we have enough orders.
cheers

Post: # 12283Unread post **piaptk** Thu Jan 20, 2011 12:47 pm

Can you get a quote for shipping to the US, please?

Post: # 12407Unread post **fraggle** Fri Jan 28, 2011 6:08 am

Ok I figured the postage out.
FOR A BOX OF 12" (50)

USA = 65 DOLLARS
BELGIUM = 25 DOLLARS
IRELAND (SOUTH) = 25 DOLLARS
GERMANY = 25 DOLLARS

FOR A BOX OF 7" (50)

USA = 50 DOLLARS
BELGIUM = 20 DOLLARS
IRELAND (SOUTH) = 20 DOLLARS
GERMANY = 20 DOLLARS

All standard service

Post: # 12409Unread post **greybeard** Fri Jan 28, 2011 8:09 am

right, this is a splendid initiative, and I would like to try it. I am putting some money where my mouth is, and I would like to order one box of 12" to be sent inside the European Union. I do not want to pay taxes on it, and certainly not to the tune of recorded music. VAT is o.k. and normal part of doing business (well, really of being a consumer, who pays it in the end), however actually that may be kept entirely out of the equation if the buyer is registered as a business. That saves on administration.

I shall PM the details (we are all a little secretive here, aren't we? and like the privacy),
thanks again,
Greybeard

Post: # 12434Unread post **piaptk** Fri Jan 28, 2011 11:36 pm

I'll take a box of each...

Post: # 12437Unread post **fraggle** Sat Jan 29, 2011 4:48 am

@ greybeard
you post made me smile:)
I'm not secretive at all but this is just easier that way otherwise i have people in pm's and here ordering stuff and that's a pain to work out.
Let me know if you want a box .
As soon as we have enough interested people I will tell Mossy and sort it out with him.
Cheers

Post: # 13078Unread post **fraggle** Thu Mar 03, 2011 5:12 am

anybody else wants to put an order in?
cheers

Post: # 13143Unread post **Audiofiligram** Sat Mar 05, 2011 11:39 pm

I take a box of black 12 " ....
Thx

Post: # 14583Unread post d Tue Apr 26, 2011 4:56 am

hey,

maybe lets get this thread alive... so situation should go more quicker....

As from other new posts about polycarbonate cutting and problems with them and mentioning that The Shank tested his diamond with pressed blanks and doing very nice cuts. So lets make the first test pressing to see the results.

I am in with:
7"
1 pack of black and 1 pack of blue

Post: # 14584Unread post **emidisc** Tue Apr 26, 2011 7:39 am

1 box of black 7" for me within EU to the UK