Diamond Stylus Available now
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
He said he would be out of stock for another week or two.
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Sapphire and diamond
Does anyone have advice for identifying what type of stylii you may have?Simon wrote:JayDC wrote:no, it came with my lathe when I bought it.. they never told me it was a diamond, I just assumed because of its coloring.. I just didn't know that sapphires could come in white.. I'm not a jeweler..piaptk wrote: Did you buy it on ebay? Every sapphire that pops up on there is listed as a diamond...
Yes they can
I know you can get diamond testers, what about sapphire? There must be other ways of checking for these materials.
You can pretty much assume that if you have a clear stylus that it is NOT a diamond.
If it's red, its a ruby, which from what a jeweller friend tells me, both ruby and sapphire and the same . Ruby is a little harder, I guess.
http://www.gemstonefacts.com/ruby.htm
Not sure how to tell the difference between stellite and sapphire, though.
If it's red, its a ruby, which from what a jeweller friend tells me, both ruby and sapphire and the same . Ruby is a little harder, I guess.
http://www.gemstonefacts.com/ruby.htm
Not sure how to tell the difference between stellite and sapphire, though.
Any word on when you will be getting any Neumann 320 shank diamonds????
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Do you have any Neumann 320 shank diamond sytli in stock?
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio