Price is 2000$. I was the first to cut on this machine and only cutted for 1 month (now i bought another machine as i want to cut also 12"). Please ask for sounds i made on this machine or else.
my email is bookwarrecords -at - gmail -dot- com
Atom 101 (Vanrock) for sale
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
Atom 101 (Vanrock) for sale
This is almost new japaneese Atom-101 lathe cutter also known as Vanrock. Fully workable, i made around 100 plastic cuts on it. Shipping is from Russia - shipping is included in the price.
Price is 2000$. I was the first to cut on this machine and only cutted for 1 month (now i bought another machine as i want to cut also 12"). Please ask for sounds i made on this machine or else.
my email is bookwarrecords -at - gmail -dot- com
Price is 2000$. I was the first to cut on this machine and only cutted for 1 month (now i bought another machine as i want to cut also 12"). Please ask for sounds i made on this machine or else.
my email is bookwarrecords -at - gmail -dot- com
-
Aussie0zborn
- Posts: 1868
- Joined: Sat Mar 11, 2006 8:23 am
- Location: Australia
- Contact:
Re: Atom 101 (Vanrock) for sale
Excellent. What did you buy to cut 12" Records ?
Re: Atom 101 (Vanrock) for sale
i bought this - same japaneese factory - same head and stylus (which i like very much)
about Atom - sorry, was a mistake, the price is different
about Atom - sorry, was a mistake, the price is different
Re: Atom 101 (Vanrock) for sale
Atom is sold and will go to Greece. I feel little sad to let go this machine ))
Re: Atom 101 (Vanrock) for sale
Actually reserved, will be sold at 1st november.
-
uvoscillator
- Posts: 132
- Joined: Wed Aug 22, 2012 1:37 am
- Location: Armenia, Yerevan
Re: Atom 101 (Vanrock) for sale
not sold yet - still in doubt
Re: Atom 101 (Vanrock) for sale
Hello. We lost the deal with Greek Man, because Paypal wanted me 2 times to proove my ID, and shortly before second proof i refunded Atom money to Greek Man. I am sorry for long ping-pong, man! (if you are reading this). So after refund (that i did because i was afraid that Paypal will block the money), Greek Man doesn`t answer. In this case i am selling Atom once again, because today Paypal finally second time prooved my ID and i can receive big amounts of money safely to buyer.
So - last week i made some prophylactic of machine and changed old rubber belt to new. Some oiling also. New price is 2500$ (with registered EMS shipping directly into your hands). So prophylactic and better safe courier shipping makes the price more.
Atom is in very good cosmetic and working condition. Very easy to use, has a built in RIAA EQ, compressor (which can be bypassed) and simple controls. The platter moves from the left to the right side (the cutting position) and when finished cutting automatically moves to the resting position. For 7' disks at 33 or 45 RPM and mono with a frequency response of 60hz to 8khz. Use a lamp or fan to heat the blank before cutting, I use a small fan which works well. I will explain everything how to use it and will send you VIDEO how to operate exactly this item. I will give you 10 blanks to start. I am ordering them on Polycarbonate factory - here the price of 1 7" blank is half dollar. You will need also electric transformer - from 220W to 100W - you can buy it in ant electric shop or web. It is important - do not put it on 220. Also recommended to buy new stylo after some time
http://www.ebay.com/itm/Tungsten-needle-styli-stylus-presto-in-rek-o-kut-record-lathe-cutter-recorder-/281686909853?hash=item4195d9239d:g:WVkAAOSwk5FUtyNx
though i used that you bought for 300 cuts or so. Check "Bookwar Records" on Discogs.
you will have more questions after getting it - always feel free to email me to bookwarrecords(at)gmail(dot)com
Now please check new pics.
So - last week i made some prophylactic of machine and changed old rubber belt to new. Some oiling also. New price is 2500$ (with registered EMS shipping directly into your hands). So prophylactic and better safe courier shipping makes the price more.
Atom is in very good cosmetic and working condition. Very easy to use, has a built in RIAA EQ, compressor (which can be bypassed) and simple controls. The platter moves from the left to the right side (the cutting position) and when finished cutting automatically moves to the resting position. For 7' disks at 33 or 45 RPM and mono with a frequency response of 60hz to 8khz. Use a lamp or fan to heat the blank before cutting, I use a small fan which works well. I will explain everything how to use it and will send you VIDEO how to operate exactly this item. I will give you 10 blanks to start. I am ordering them on Polycarbonate factory - here the price of 1 7" blank is half dollar. You will need also electric transformer - from 220W to 100W - you can buy it in ant electric shop or web. It is important - do not put it on 220. Also recommended to buy new stylo after some time
http://www.ebay.com/itm/Tungsten-needle-styli-stylus-presto-in-rek-o-kut-record-lathe-cutter-recorder-/281686909853?hash=item4195d9239d:g:WVkAAOSwk5FUtyNx
though i used that you bought for 300 cuts or so. Check "Bookwar Records" on Discogs.
you will have more questions after getting it - always feel free to email me to bookwarrecords(at)gmail(dot)com
Now please check new pics.
You do not have the required permissions to view the files attached to this post.
Re: Atom 101 (Vanrock) for sale
SOLD to GREEK MAN! finally