Plating and Pressing in the media.
Moderators: piaptk, tragwag, Steve E., Aussie0zborn
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Plating and Pressing in the media.
Came allong this documentary about vinyl in general and manufactures, a couple of familair names and faces;
https://youtu.be/URUQiRKjwJg
Instead of opening a new topic for every article i come across heres a topic on vinyl in the media in general.
Offourse everbody is welcome to post allong as the more people the more joy they say!
https://youtu.be/URUQiRKjwJg
Instead of opening a new topic for every article i come across heres a topic on vinyl in the media in general.
Offourse everbody is welcome to post allong as the more people the more joy they say!
- EmAtChapterV
- Posts: 244
- Joined: Sun Jan 06, 2013 6:49 pm
- Location: Vancouver, BC
Re: Plating and Pressing in the media.
Canada Boy Vinyl in Calgary AB is now up and running, and was in a few news outlets about their grand opening recently - https://www.youtube.com/watch?v=c7hlCiG_NFQ
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Re: Plating and Pressing in the media.
A glimps in probably the newest plant around, nice!
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Re: Plating and Pressing in the media.
https://youtu.be/g4IBmFrQwbg
SMT (Southern Machine & Tool Corp.), Promotional Video
Tight times and a little peak at manufracturing of a press.
SMT (Southern Machine & Tool Corp.), Promotional Video
Tight times and a little peak at manufracturing of a press.
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Re: Plating and Pressing in the media.
Its beyond me how to embed a video here. Can someone enlighten this?
Re: Plating and Pressing in the media.
You had the [YouTube2] tag almost correct. If you remove everything in the link to the video except the id number of the video at the end of the link, then it will work.untitledthe wrote:Its beyond me how to embed a video here. Can someone enlighten this?
Copy what I have below, but cooy it to one line with no spaces inbetween. I wrote it on 3 lines so you coukd see the text. It would otherwise display the video instead.
[YouTube2]
g4IBmFrQwbg
[/YouTube2]
Cutting, Inventing & Innovating
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
Groove Graphics, VMS Halfnuts, MIDI Automation, Professional Stereo Feedback Cutterheads, and Pesto 1-D Cutterhead Clones
Cutterhead Repair: Recoiling, Cleaning, Cloning of Screws, Dampers & More
http://mantra.audio
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Re: Plating and Pressing in the media.
Thank you very much Opcode66 !
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Re: Plating and Pressing in the media.
Here we go! *edit; ah great, works like a charm and direct on the right size, thanks again!
SMT (Southern Machine & Tool Corp.), Promotional Video
SMT (Southern Machine & Tool Corp.), Promotional Video
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
- EmAtChapterV
- Posts: 244
- Joined: Sun Jan 06, 2013 6:49 pm
- Location: Vancouver, BC
Re: Plating and Pressing in the media.
Another video from Canada Boy Vinyl - it looks like they've got their galvanics department up and running now. Let's see if this link works: http://bcove.me/jyqxzfr8
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Re: Plating and Pressing in the media.
[Vimeo]84056582[/Vimeo]
https://vimeo.com/84056582
(Steve's tour at a plant in New York(?), been up for a while but its a nice one)
https://vimeo.com/84056582
(Steve's tour at a plant in New York(?), been up for a while but its a nice one)
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Re: Plating and Pressing in the media.
Artical on new owners A&R Records Texas;
http://www.thevinylfactory.com/vinyl-factory-news/the-only-record-pressing-plant-in-texas-has-been-rescued/
Re: Plating and Pressing in the media.
here a very rough, uncut video:
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Re: Plating and Pressing in the media.
Something to read from may this year, but still relevant i guess;
http://www.factmag.com/2015/05/07/pressed-to-the-edge-vinyl/
http://www.factmag.com/2015/05/07/pressed-to-the-edge-vinyl/
Re: Plating and Pressing in the media.
Thanks
This article is to be taken with a pinch of salt
It represents a very very narrow view of the European scene
In essence its one sided, leaning towards the negative side
What does it say? What message does it send?
Oh yes, there is a vinyl revival but its not going to last
We been hearing this for at least 20, if not many more years
Best
This article is to be taken with a pinch of salt
It represents a very very narrow view of the European scene
In essence its one sided, leaning towards the negative side
What does it say? What message does it send?
Oh yes, there is a vinyl revival but its not going to last
We been hearing this for at least 20, if not many more years
Best
Chris
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Re: Plating and Pressing in the media.
A audio podcast on supply and demand by Vinyl Factory
http://www.thevinylfactory.com/vinyl-factory-releases/pressing-matters-listen-to-our-new-podcast-on-supply-and-demand-in-the-vinyl-industry/
you can listen here;Having asked whether the internet has ruined the joy of record collecting in our first podcast and taken issue with reissues in the second, we’ve invited four industry experts to explore the pressing matters of supply and demand at the very heart of the vinyl industry.
With demand at its highest in over twenty years and manufacturers busier than ever we’re joined by Frank Merritt of mastering and vinyl production outfit The Carvery, independent mastering consultant and all-round vinyl expert Crispin Murray, Sofia Ilyas of Erased Tapes Records and Gennaro Castaldo industry watchdog the BPI.
The podcast will be split into three parts. The first will look at the first link in the chain, the manufacturing process, where we’ll discuss how you actually make a vinyl record, where the delays are creeping in and why just opening more pressing plants isn’t necessarily the answer. Part two will deal with the role of record labels as arbiters between fans and factories, and ask how big an impact, both positive and negative, Record Store Day and major labels have had on getting records released. The third will look at the demand, as we’ll discuss just who are buying all these records, whether growth will continue and if so, what the supply chain can do to help keep vinyl changing hands.
http://www.thevinylfactory.com/vinyl-factory-releases/pressing-matters-listen-to-our-new-podcast-on-supply-and-demand-in-the-vinyl-industry/
Re: Plating and Pressing in the media.
Thanks Journalistic license really
But always good to hear the vibe out there
Another perspective
Best
But always good to hear the vibe out there
Another perspective
Best
Chris
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Re: Plating and Pressing in the media.
Its a little entertainment too, yes.
Nothing wrong with that.
Nothing wrong with that.
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
- untitledthe
- Posts: 183
- Joined: Thu Jan 22, 2015 1:24 pm
- Location: Netherland
Re: Plating and Pressing in the media.
Story on Viryl Technologies from earlier on here on the forum;
http://www.theglobeandmail.com/report-on-business/small-business/startups/canadian-firm-comes-to-the-rescue-of-vinyl-lovers-by-building-new-pressing-machines/article28507701/
http://www.theglobeandmail.com/report-on-business/small-business/startups/canadian-firm-comes-to-the-rescue-of-vinyl-lovers-by-building-new-pressing-machines/article28507701/