My first grooves.

This is where record cutters raise questions about cutting, and trade wisdom and experiment results. We love Scully, Neumann, Presto, & Rek-O-Kut lathes and Wilcox-Gay Recordios (among others). We are excited by the various modern pro and semi-pro systems, too, in production and development. We use strange, extinct disc-based dictation machines. And other stuff, too.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
sameal
Posts: 347
Joined: Sun May 24, 2015 10:13 pm
Location: Milwaukee, wi
Contact:
Contact sameal

My first grooves.

Post: # 50358Unread post sameal
Thu May 17, 2018 10:00 pm

Well here they are!

It didn't last long before i got a swarf plug, but for a whole two or three seconds i was cutting a record!

Pretty much everything i built so far needs to be adjusted, as i expected.

3 years work for 3 whole seconds of fun. Totally worth it.
You do not have the required permissions to view the files attached to this post.
Top

Click Here!

User avatar
Voxster1965
Posts: 81
Joined: Tue Apr 21, 2015 11:38 pm

Re: My first grooves.

Post: # 50359Unread post Voxster1965
Fri May 18, 2018 12:43 am

Get your hands on some talc for that tube my friend :)
Top
User avatar
sameal
Posts: 347
Joined: Sun May 24, 2015 10:13 pm
Location: Milwaukee, wi
Contact:
Contact sameal

Re: My first grooves.

Post: # 50362Unread post sameal
Fri May 18, 2018 7:01 am

Voxster1965 wrote:Get your hands on some talc for that tube my friend :)
Good idea. It plugged up pretty quick.

I had a few other issues, the dashpot is way too heavy for this head, heat wire fell off!, swarf tube needed to be closer and the l.p.i. number was just a guess. I think i bottomed out on the lacquer too.

But, it worked!
Top
User avatar
ilium
Posts: 84
Joined: Sun Feb 08, 2015 10:50 pm

Re: My first grooves.

Post: # 50423Unread post ilium
Tue May 22, 2018 5:28 pm

which are you cutting with the Presto 8dg or the Westrex 2b?
Top
User avatar
Voxster1965
Posts: 81
Joined: Tue Apr 21, 2015 11:38 pm

Re: My first grooves.

Post: # 50424Unread post Voxster1965
Tue May 22, 2018 8:04 pm

If you bottomed out on the lacquer, you will have stuffed your diamond up - cut shallow to start or you will be spending up big on replacement styli.
Top
User avatar
sameal
Posts: 347
Joined: Sun May 24, 2015 10:13 pm
Location: Milwaukee, wi
Contact:
Contact sameal

Re: My first grooves.

Post: # 50425Unread post sameal
Tue May 22, 2018 9:21 pm

ilium wrote:which are you cutting with the Presto 8dg or the Westrex 2b?
Im using a webster. My 2b isn't back yet
Top
User avatar
sameal
Posts: 347
Joined: Sun May 24, 2015 10:13 pm
Location: Milwaukee, wi
Contact:
Contact sameal

Re: My first grooves.

Post: # 50426Unread post sameal
Tue May 22, 2018 9:23 pm

I gotta rethink my whole mount if i wanna run smaller heads, because the mods to the lathe for the westrex.
Top
Post Reply

Click Here!