VR Cutter Head Repair/Replacement

Introduce yourself! Recommended for people who are just starting out, as opposed to experienced lathe cutters who are new members.

Moderators: piaptk, tragwag, Steve E., Aussie0zborn

Post Reply
User avatar
literal_screw
Posts: 11
Joined: Tue Jan 08, 2019 6:17 pm

VR Cutter Head Repair/Replacement

Post: # 52732Unread post literal_screw
Thu Mar 28, 2019 3:42 pm

Greetings fellow Trolls,

There's a good chance my VM cutter head speaker have sustained some damage, does anyone know where I can get it repaired or order a replacement other than from Souri?

Looking to get this resolved ASAP.


Thanks you in advance for your time and talents.


Best,

LS

User avatar
handcut
Posts: 252
Joined: Thu Oct 16, 2014 5:41 pm

Re: VR Cutter Head Repair/Replacement

Post: # 52740Unread post handcut
Fri Mar 29, 2019 3:06 pm

Hi, there is a very long thread about this. It may be the only help you can get. The head is an unusual design and I dont know of anybody who is 'officially' repairing them. I'm sure folks on here will help you if they can. Good luck.


User avatar
literal_screw
Posts: 11
Joined: Tue Jan 08, 2019 6:17 pm

Re: VR Cutter Head Repair/Replacement

Post: # 52946Unread post literal_screw
Wed Apr 17, 2019 4:29 pm

Thanks handcut!

Post Reply