For Sale: kingston Dubplate cutter Overhead

[Mutech]

Like new, including original case. Only overhead. Head and amp not included. Send your offer by prívate message. Located in Spain

[flozki]

Hei.. I might be Interested..maybe also a swap
Or cash..flo

[leemichael]

I also have overhead 001 in the case I might swap for something interesting!

[Mutech]

Flo, I’ve sent you an email, thank you!!!

[Mutech]

Sold

[AUT0M8]

Leemichael... I might be interested in buying it from you. Are you interested?

[leemichael]

Leemichael... I might be interested in buying it from you. Are you interested?

I’m going to hold out a little longer to see if I can find a SC-99 to reunite it with.

Otherwise I’m going to build a unique complete portable cutting system with it using one of our stereo Nautilus cutting heads (one off in red!) which will also mean it will be able to cut 12” (for the first time ever!) instead of the maximum 10” with the larger SC-99.

IMG_1543.jpeg

[AUT0M8]

Exactly what i had in my mind. Good Luck

[flozki]

This was always for 12inch records…
Sc99 is smaller hat hab this Mock up I think

[leemichael]

This was always for 12inch records…
Sc99 is smaller hat hab this Mock up I think

Ah ok when I read the instructions PDF it made me think 10” only for some reason!

https://u-coa.com/uploads/ucoa/documents/20200228074744-8b5dddea4b0335c464d46218880d263a.pdf

[Casanova]

Hi guys,
I might be interested in a overhead or complete kit too, if someone has one to sell.
I'm located in Italy.

Thanks,
Andrea.

[zdenek]

Hi guys,
I might be interested in a overhead or complete kit too, if someone has one to sell.
I'm located in Italy.

Thanks,
Andrea.

It was you and your film that inspired me. That's why I decided to make such cutting heads.https://www.youtube.com/watch?v=oHGQ39usyjM&t=94s
And I'm already very close to the original

[zdenek]

Leemichael... I might be interested in buying it from you. Are you interested?

I’m going to hold out a little longer to see if I can find a SC-99 to reunite it with.

Otherwise I’m going to build a unique complete portable cutting system with it using one of our stereo Nautilus cutting heads (one off in red!) which will also mean it will be able to cut 12” (for the first time ever!) instead of the maximum 10” with the larger SC-99.

IMG_1543.jpeg

Is your head unit based on tweeters or something else?
And one more question for you, seller: is the feedback loop in your head?

Thanks for the reply, and if you have a video of the live recordings, I'd like to see the disc being cut and pressed. That would be great.I'm not really interested in the color; I can have it anodized red at a friend's factory. Unless your head is plastic, anodizing won't work.

[Podorvanov]

Hello everyone. Guys, does anyone know what kind of motor is used to feed the head in this Overhead? I just have the VC200 unit itself, and I'd like to connect the motor it's designed for. Yes, I've found an electric motor that works with it, but it's not quite what I'd like.